Hony Engineering Plastics Co.,Ltd.
Hony Engineering Plastics Co.,Ltd.
홈페이지> 블로그
February 28, 2023
Application of FR4 epoxy insulating glass fiber board

Application of FR4 epoxy insulating glass fiber board

February 28, 2023
Four common epoxy board processing methods

Four common epoxy board processing methods

February 26, 2023
Difference between GPO3 and FR4

Difference between GPO3 and FR4

February 19, 2023
How good would it be if the "double eyelids" of clairvoyance were made of carbon fiber PEEK?

During World War II, the telescopes used by the German army were of the highest specification. The telescope barrels were made o

February 15, 2023
About bakelite

Bakelite is made of insulating impregnated paper impregnated with phenolic resin, baked and hot pressed. This product is s

February 02, 2023
Extreme Materials (>220°C) Material Grades

Hony Plastic provide Extreme Material

January 30, 2023
The application of antistatic board

The application of anti-static board

December 31, 2022
Three Quality Inspection Steps Analysis of CNC Flame Cutting Machine Parts

Sampling inspection is the final threshold for the inspection of workpieces. It is necessary to measure the specific dimensions of the slit width, flatness and verticality

November 03, 2022
PPS injection molding parts Specificate

Engineering Plastic Pps Plate Sheet Rod Machined parts and 

September 27, 2021
What materials do PA and POM refer to?

Polyamide (PA, Nylon) Structural formula [NH(CH2)m NHCO(CH2)n-2CO] Properties Crystalline thermoplastic plastic with obvious melting point. Nylon6 Tm is 220~230℃, Nylon66 is 260~270℃

September 15, 2021
What is nylon board

Mostly used in sliders, pads, pads and the like. The main advantages are: (1) High strength, able to bear the load for a long time;    (2) Good resilience, able to bend without deformation,

September 10, 2021
Nylon rod use

Nylon rod use:

August 27, 2021
What material is M/C NYLON

What material is M/C NYLON ? NYLON is MCPA cast nylon, also called c

August 24, 2021
What are the antistatic agents used in plastics in the industry?

There are many kinds of antistatic agents, such as anionic, cationic, polymer and composite.

August 23, 2021
Japanese companies promote carbon fiber reinforced sheet molding plastics business

According to Japanese media reports, Asahi Organics Industries plans to develop a carbon fiber reinforced sheet molding compound (SMC) business

August 22, 2021
HONY®Bakelite Economic benefit

HONY®Bakelite products are the first choice for ma

August 21, 2021
What are the differences between anti-static and insulation?

The main difference is the size of the resistor: Resistance greater than 10 to the 12th power ohm is insulation Resistance greater than 10 to the 6th power and less than

August 19, 2021
What is the difference between epoxy resin board and bakelite board

What is the difference between epoxy resin board and bakelite board

August 18, 2021
Characteristics of Bakelite

Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electr

August 17, 2021
Imported Bakelite, Taiwan Bakelite, Red

Imported Bakelite, Taiwan Bakelite, Red This product is red, imported from Taiwan bakelite, with high quality, good reliability, and improved industrial qualit

August 16, 2021
The 15th Shenzhen International Plastics and Rubber Industry Exhibition 2021

The 15th Shenzhen International Plastics and Rubber Industry Exhibition 2021 The 15th Shenzhen International Plastics and Rubber Industry Exhibition October 19-21, 2021 Shen

August 13, 2021
Characteristics of Bakelite

Characteristics of Bakelite Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electric

August 13, 2021
Whether the bakelite is anti-static ?

Whether the bakelite is anti-static ?  Bakelite sheet is also called bakelite board, phenolic laminated board. Use high-quality bleached wooden building paper and cotton linter

July 16, 2021
Status of China's plastic products industry in 2020

Status of China's plastic products industry in 2020 Plastic products are the general term for daily, industrial and other articles processed using plastic as the

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신